Compact Exterior Cladding
G-Ext® exterior cladding produced with the electron bombardment curing (EBC) system is produced as resistant to external factors.
Its specially produced surface preserves its first day appearance despite harsh weather conditions such as snow, rain, wind, temperature differences and sunlight. Decorative panels produced with different colors and patterns are especially preferred in exterior design applications. Thanks to its resistance to conditions, it is resistant to bending, breaking, bending and scratching. With its extra reinforced surface, it is resistant to chemical effects and fungi. In addition, if desired, it can be produced in fire resistant B1 jerseys.
G-Ext ® decorative panels; It has application areas such as shopping centers, sports halls, hospitals, schools, commercial spaces, airports, residences, balconies.
Thickness: 4mm - 20mm
Dimensions: 1300 - 2800 mm - 1300 - 3050 mm
In the compact laminate curtain wall system, the façade sub-construction will be anchored to the carrier system of the building with aluminum vertical profiles and “L” brackets made of galvanized DKP sheet at regular intervals. Before fixing the aluminum vertical profiles to the anchors, heat and water insulation materials will be applied by the employer. After the determination of the aluminum vertical profiles, one or more of the hooked or adhesive mounting systems will be selected and the panels will be fixed to the carriers.
In a building clad with Compact Laminate facade cladding system, maximum ventilation is aimed because the building surface and the cladding are completely separated. In this way, humidity, heat loss and temperature differences are prevented. Because of these conditions, the system is also called cold fronts. The system, which falls under the category of semi-ventilated curtain wall systems, is attached for your information with its optimum conditions and details.
Hooked Suspension System
This mechanical assembly system, which will be applied using compact laminate panels with a wall thickness of 10 mm; It is applied to the aluminum profiles vertically connected to the building facade by means of "L" brackets made of galvanized DKP sheet, by mounting aluminum rails with special cross-sections horizontally. The brackets attached to the back of the panels are attached to the aluminum rails with adjustable screws. Corner and joint solutions are given in the appendix.
Panel gluing system
This system, which will be implemented using compact laminate panels with a wall thickness of 6 or 8 mm; It is applied vertically to the facade of the building by sticking it to aluminum “T” profiles, which are connected by means of “L” brackets made of galvanized DKP sheet.
